Welcome to Elite Security Supplies, Security Parking Posts and barrier posts

We carefully select our Security posts to ensure you have the highest quality clamps at the lowest price. We supply the trade and can offer even bigger saving on bulk orders. Our security posts have a variety of uses, for security parking to protect your premises from unwanted vehicles parking, for securing a vehicle or garage from theft and to provide perimeter protection from fly tipping etc The majority of our security posts are also available in different powder coated colours, please contact us for more details.
	Heavy Duty Barrier parking Post Product Code 102 Made from 80mm x 80mm x 3mm RHS Section. 800mm high Unique locking system at easy reach height. Push button locking. Lift out handles. Hinged cover plate - flush fitting. Built in - flush fitting Key only required to open post. Hazard tape on front of post. Zinc plated finish. Includes one base unit Ideal for commercial applications. Available keyed alike ( same key for multiple posts ). Our Most popular high security post. Our Price £119.99

	Heavy Duty Barrier Post Base Station Product Code 102A A separate base unit can be purchased to station your post when not in use, (supplied without the fold down lid ) the station can be either bolted down on to the concrete or set flush into concrete. Ideal in commercial applications where the post is removed during the day for access, the post can be locked into the base station ensuring the post cannot be stolen! Our Price £15.00

	Heavy Duty Barrier Post Eye Bolt Sleeve Product Code 102B An additional case hardened eye bolt sleeve can be purchased to fit 102 adapting this post into a ground anchor, the sleeve simply slides onto the post and can be bolted on at any convenient position/height. Ideal to double secure caravans, trailers etc to the post using one of our approved heavy duty chain/padlock combinations, prices start from £49.99. Our Price £15.00
	Retractable Parking / Security Post Product Code 107 Flush fitting, post sinks completely into the ground Heavy construction 760mm Overall height, 600mm Height from ground level Inner section 60mm square x 4mm RHS , Outer section 90mm diameter. Special feature - Automatically locks into position when lifted ready for padlock insertion Ground level Padlock facility- complete with 90mm discus stainless steel close shackle padlock Zinc plated finish Made in Britain. Please note padlock shown is NOT the padlock supplied ( padlock subject to availability ) Our Price £119.99
	The Garage Defender "Master" product code 301 A visible and highly effective deterrent to theft from a garage fitted with an 'up and over' door. Certificates: Sold Secure approved product. Solid Steel Hardened Shackle less Padlock Included Simple ground fitting in front of garage door with two expandable security rawlbolts included. Easy to fit within the hour. Attractive green powder coated finish. Defender unit locks onto solid steel base with padlock to prevent the door from forced opening. Full fitting instructions included. Made in Britain. For fitting to block paving and tarmac driveways order the "Built In Base unit", we will supply this fitment free of charge (normally £19.99), please state when ordering. Our Price £63.00
Operation The bar locks onto the anchor unit with a heavy duty, concealed padlock. When locked, the heavy duty bar prevents the garage door from being opened. Fitment Fix the solid steel base plate In front of garage door with two expandable security raw bolts provided.The Defender unit then locks onto the steel base with the included Padlock. we recommend 4-5 inches of good solid concrete outside the closed garage door for this application.
	Garage Defender master with "Bolt Down" Base
	Garage Defender master with "Built in" Base
	Garage Defender Product code 302 A visible and highly effective deterrent to theft from a garage fitted with an 'up and over' door. As featured in the BBC documentary series "To Catch A Thief" Certificates Sold Secure approved product. Independent concealed armoured padlock included. Simple ground fitting in front of garage door with two expandable security rawlbolts included. Easy to fit within the hour. Attractive red powder coated finish. Defender unit locks onto solid steel base with padlock to prevent the door from forced opening. Full fitting instructions included. For fitting to block paving and tarmac driveways order the "Built In Base unit", we will supply this fitment free of charge (normally £19.99), please state when ordering. Our Price £49.99
Operation The bar locks onto the anchor unit with a heavy duty, concealed padlock. When locked, the heavy duty bar prevents the garage door from being opened. Fitment Fix the solid steel base plate In front of garage door with two expandable security raw bolts provided.The Defender unit then locks onto the steel base with the included Padlock. we recommend 4-5 inches of good solid concrete outside the closed garage door for this application.
	Garage Defender with "Bolt Down" Base unit
	Garage Defender With "Built in" Base unit
	Yellow Security Parking Post Product Code LCC 930 As Used by the DVLA Easy to use fold down parking post, offering effective parking control and security. Convenient integral radial pin lock at top of post. Post can be locked in vertical or horizontal position by pushing the plunge lock. Unlock with key - two keys supplied. Post folds down and rests on rubber stopper. Three bolt holes in base for bolting post down (bolts not supplied). Solid steel construction. Dimensions Weight: 4.7 kg Overall height 625mm, folded down 105mm. Made from 65mm x 3mm quality steel tube. RRP £89.99 Our Price: £69.99 Sorry out of stock
	Yellow Security Parking Post £69.99
	Heavy Duty Telescopic parking security Post Product code (KTP3P) Submerged heavy duty post Heavy duty 70mm steel square. Retractable handle for easy operation. Submerged depth 740mm. Extends to 550mm. Zinc plated for protection against corrosion. Includes PP10 high security discus padlock. 4 pin cylinder lock with 2 keys. Stainless steel body with hardened steel shackle. Our Price £149.95
	Fold Down Auto Parking Post Electronic Parking Post. Opens and closes with remote control key fob (2 supplied). Equipped with large capacity battery to supply power battery life approx. if used 4 times a day is 3 months (charger included) Installation Instruction The Auto Parking Post can not be installed on ground which is filled with water To fix the position on the ground, mark on the ground according to the screw positions of the Auto Parking Post. Then use the expanding screws to fix the Auto Parking Post to the ground. Connect the wire between the motor and the control board (2 hole plugs) Connect the wire between the battery and the control board (3 hole plugs) Operation Manual On remote control press button It stands up the Auto Parking Post Press Button It lays the Auto Parking Post down. Press button : stop the moving controller. When the battery does not have enough power. The battery will have the alarm. That reminds you to charge. Then take out the 3 holes plug. Take battery out and charge. After charging put the battery back in box and connect the wires. Emergency case, unscrew and take the shaft on the connection of the Auto Parking post and the expansion pipe and lay it down. Our Price £212.00
Technical Data Voltage of working motor: 12v DC Battery: 12v 7.0Ah sealed Lead-acid battery Power consumption (operation): 20w Power consumption (stand by):30mW Distance of remote control: >20m Time of lying down: 8-10 seconds Time of standing up: 9-11 seconds Dimension of the Parking Post are (up): 640x350x450 (LxWxH) Dimension of the Parking Post (down): 1040x350x90 (LxWxH)


We aim to deliver a complete "motorcycle security" package, if you cant find what you looking for please contact us and one of our staff will be pleased to help you. Remember we are your "friendly security chain company", we will give you our honest and objective opinion on any security product, with no hard sell guaranteed.1

security posts, parking posts, security parking posts, Barriers posts

Security Parking Posts, Barrier posts

Security Products

Motorcycle Links

Link Exchange Program

Welcome to Elite Security Supplies, Security Parking Posts and barrier posts

We carefully select our Security posts to ensure you have the highest quality clamps at the lowest price. We supply the trade and can offer even bigger saving on bulk orders.

Heavy Duty Barrier parking Post

Product Code 102

Made from 80mm x 80mm x 3mm RHS Section.

800mm high

Unique locking system at easy reach height.

Push button locking.

Lift out handles.

Hinged cover plate - flush fitting.

Built in - flush fitting

Key only required to open post.

Hazard tape on front of post.

Zinc plated finish.

Ideal for commercial applications.

Available keyed alike ( same key for multiple posts ).

Our Most popular high security post.

Our Price £119.99

Heavy Duty Barrier Post Base Station

Product Code 102A

A separate base unit can be purchased to station your post when not in use, (supplied without the fold down lid ) the station can be either bolted down on to the concrete or set flush into concrete.

Ideal in commercial applications where the post is removed during the day for access, the post can be locked into the base station ensuring the post cannot be stolen!

Our Price £15.00

Heavy Duty Barrier Post Eye Bolt Sleeve

Product Code 102B

An additional case hardened eye bolt sleeve can be purchased to fit 102 adapting this post into a ground anchor, the sleeve simply slides onto the post and can be bolted on at any convenient position/height.

Ideal to double secure caravans, trailers etc to the post using one of our approved heavy duty chain/padlock combinations, prices start from £49.99.

Our Price £15.00

Retractable Parking / Security Post

Product Code 107

Flush fitting, post sinks completely into the ground

Heavy construction

760mm Overall height, 600mm Height from ground level

Inner section 60mm square x 4mm RHS , Outer section 90mm diameter.

Special feature - Automatically locks into position when lifted ready for padlock insertion

Ground level Padlock facility- complete with 90mm discus stainless steel close shackle padlock

Zinc plated finish

Please note padlock shown is NOT the padlock supplied ( padlock subject to availability )

Our Price £119.99

The Garage Defender "Master"

product code 301

A visible and highly effective deterrent to theft from a garage fitted with an 'up and over' door.

Certificates: Sold Secure approved product.

Simple ground fitting in front of garage door with two expandable security rawlbolts included.

Easy to fit within the hour.

Attractive green powder coated finish.

Defender unit locks onto solid steel base with padlock to prevent the door from forced opening.

Full fitting instructions included.

For fitting to block paving and tarmac driveways order the "Built In Base unit", we will supply this fitment free of charge (normally £19.99), please state when ordering.

Our Price £63.00

Operation

The bar locks onto the anchor unit with a heavy duty, concealed padlock. When locked, the heavy duty bar prevents the garage door from being opened.

Fitment

Fix the solid steel base plate In front of garage door with two expandable security raw bolts provided.The Defender unit then locks onto the steel base with the included Padlock. we recommend 4-5 inches of good solid concrete outside the closed garage door for this application.

Garage Defender master with "Bolt Down" Base

Garage Defender master with "Built in" Base

Garage Defender

Product code 302

A visible and highly effective deterrent to theft from a garage fitted with an 'up and over' door.

As featured in the BBC documentary series "To Catch A Thief"

Certificates

Sold Secure approved product.

Independent concealed armoured padlock included.

Simple ground fitting in front of garage door with two expandable security rawlbolts included.

Easy to fit within the hour.

Attractive red powder coated finish.

Defender unit locks onto solid steel base with padlock to prevent the door from forced opening.

Full fitting instructions included.

For fitting to block paving and tarmac driveways order the "Built In Base unit", we will supply this fitment free of charge (normally £19.99), please state when ordering.

Our Price £49.99

Operation

The bar locks onto the anchor unit with a heavy duty, concealed padlock. When locked, the heavy duty bar prevents the garage door from being opened.

Fitment

Fix the solid steel base plate In front of garage door with two expandable security raw bolts provided.The Defender unit then locks onto the steel base with the included Padlock. we recommend 4-5 inches of good solid concrete outside the closed garage door for this application.

Garage Defender with "Bolt Down" Base unit